Turbidity (ISO) Portable Meter

Portable turbidimeter (ISO) HI98713 is one of the portable and highly accurate laboratory equipment. The meter is supplied with AMCO-AEPA-1 primary turbidity standards for calibration and performance verification. The HI98713 meets and exceeds the requirements of the ISO 7027 method for measuring turbidity.

Advantages Turbidity (ISO) Portable Meter

with cover for more security
Large, easy-to-read LCD with backlight. User-friendly information and symbols accompany the user through measurement and calibration.
Powerful optical system based on the ISO 7027 method: an infrared LED and two detectors ensure reliable measurements and minimal calibration. The 25 mm wide round cuvettes ensure repeatability and consistency of the measurements.
Extra low measuring range
Three measurement modes (Normal measurement mode, Continuous measurement mode, Average measurement mode) selectable depending on the required accuracy
Automatic calibration up to 4 points
Exclusive Tag Identification System:
Measurements can be assigned an identification number via a small measuring cell (i-Button®) – for easy data management!
GLP (Good Laboratory Practice) function:
enables the date, time and value of the last calibration to be saved and called up at any time.
Memory function and PC interface:
up to 200 measured values ​​can be stored and easily transferred to your PC via USB or RS 232 interface.
Battery charge indicator and automatic switch-off after a 15-minute measurement break
Complete – ready to use
Excellent value for money!

 model HI 98713-02
measuring ranges 0.00 to 9.99; 10.0 to 99.9; 100 to 1,000 FNU* (automatic range selection)
accuracy ±2% of reading plus 0.1 FNU
repeatability ±1% of reading or 0.01 FNU, whichever is greater
scattered light < 0,1 FNU
Usual EMC deviation ±0.05 FNU
light source Infrared LED 860 nm
Lifetime light source approx. 100,000 measurements
IR-Detector Silikon Photozelle
measurement method Infrared method ISO 7027, with 90° and 180° detector
calibration 2, 3 or 4 points
storage capacity 200 readings
Standards <0.1, 15, 100 and 750 FNU
PC Interface RS 232 or USB interface
Environmental conditions 0 to 50°C; RH max 95%
power supply 4 x 1.5V batteries or 12 VDC adapter / automatic switch-off after 15 minutes
dimensions / weight 224 x 87 x 77 mm / 512 g

Additional information



Model :


0.0 Average Rating Rated ( 0 Review )

Submit Review

There are no reviews yet.

Be the first to review “Turbidity (ISO) Portable Meter”

Your email address will not be published. Required fields are marked *

General Inquiries

There are no inquiries yet.