Fiber Analyzer

Fiber Analyzer 8000 is one of the laboratory equipment that has the lowest operator time among other fiber analysis systems. Raw fibers and detergents according to the standard reference method, the minimum operator time value of each fiber analysis solution. Official reference method results with unrivaled accuracy (ISO, AOAC).

Lowest operator time of any fibre analysis solution. Official reference method results with unrivalled accuracy (ISO, AOAC). Safest fibre analysis solution available. Sample type Feed, Feed ingredients, Forage, Pet food, Grain, Cereal and Oil seeds. Parameters Crude Fibre (CF), Neutral Detergent Fibre (NDF), Acid Detergent Fibre (ADF) and Acid Detergent Lignin (ADL).

Samples are handled separately in standard filter crucibles which are used both as an integral part of the assembly during extraction, rinsing and filtration and as sample vessels during weighing, drying and ashing. Sample residue remains in the crucible during the whole procedure, avoiding sample transfer and associated risk of error.

The FT 121 Fibertec™ cold extraction unit can be used in combination with the fully automated Fibertec™ 8000 for de-fatting samples and extraction at ambient temperatures and solvent dehydration of fibre residues.

The Fibertec™ 8000 provides official method results (ISO, AOAC), with the safest fibre analysis solution available for crude fibre, ADF, ADL and NDF. Non-attended measurement of up to six samples simultaneously releases staff to do other things – it can even run overnight.

Innovative safety features help you to raise the safety level in everyday operations. All reagents are dispensed automatically avoiding any contact with hot chemicals and their fumes. In addition, automatic heat reduction when the boiling point is reached prevents spillage. The system adds antifoam and enzymes automatically (when required).

Technical specification Fiber Analyzer

Performance data

Sample size

0.5 – 3g

Measuring range

0.1 % – 100 %

Capacity per batch

Up to 6 samples

Capacity per day

Up to 36 analysis (crude fibre method)


± 1 % relative at 5 % – 30 % fibre level

Installation Requirements

Power supply

200 – 240 V 50 – 60 Hz

Power consumption

2 000 W

Water supply

Fibertec 8000: Tap water minimum 2 l/min (4-25 °C, depending on water pressure), FT 121 Cold extraction unit: Tap water 2 l/min

Fibertec™ 8000

FT 121 Fibertec™  




Dimensions (W x D x H)

730 × 390 × 640 mm

560 × 380 × 280 mm

Additional information



Model :



0.0 Average Rating Rated ( 0 Review )

Submit Review

There are no reviews yet.

Be the first to review “Fiber Analyzer”

Your email address will not be published. Required fields are marked *

General Inquiries

There are no inquiries yet.